HP ProLiant DL165 G6 Server Software Configuration Guide

System BIOS configuration 24
USB Configuration submenu
Figure 18 USB Configuration submenu
NOTE: When you install USB storage, there is display USB Mass Device Configuration item. From
this item, you can get some information about the device, some information you can configure if you
need.
Table 16 USB Configuration submenu fields
Field
Description
Options
USB Controller This setting allows the use of the USB function. This is the default setting. Enabled
This setting makes the onboard USB function unavailable. Disabled
USB 2.0 Controller
Mode
This setting allows the use of USB ports transfer data in 480Mbps. This is
the default setting
HiSpeed
This setting allows the use of USB ports transfer data in 12Mbps. FullSpeed
BIOS EHCI Hand-
Off
Set this value to support the EHCI-off. This is default value. Enabled
Set this value to not allow support the EHCI-off. Disabled