HP ProLiant DL165 G6 Server Software Configuration Guide

System BIOS configuration 15
Table 6 Super IO Configuration submenu fields
Option
Description
2E8/IRQ3 Set this value to allow the embedded serial port to use 2E8 as its I/O port address and IRQ 3
for the interrupt address. If the system will not use a serial device, it is best to set this port to
Disabled.
2F8/IRQ3 Set this value to allow the embedded serial port to use 2F8 as its I/O port address and IRQ 3
for the interrupt address. If the system will not use a serial device, it is best to set this port to
Disabled.
S-ATA Configuration submenu
Figure 8 S-ATA Configuration submenu
Table 7 S-ATA Configuration submenu fields
Field Description Options
S-ATA Mode Set this value to S-ATA mode. S-ATA
Set this value to P-ATA mode. P-ATA
INT13 Support Set this value to enabled INT13 support. Enabled
Set this value to disabled INT13 support. Disabled
NCQ Mode Set this value to enabled NCQ Mode. Enabled
Set this value to disabled NCQ Mode. Disabled
Drive Write Cache Set this value to disabled Drive Write Cache. Disabled
Set this value to enabled Drive Write Cache. Enabled