HP ProLiant DL165 G6 Server Software Configuration Guide

System BIOS configuration 14
Table 5 CPU Configuration submenu fields
Field
Description
Options
Set this value to allow the L2 Data Cache ram to be corrected
while idle.
Enabled
L3 ECC Scrub Control Set this value to not allow the L3 Data Cache ram to be
corrected while idle.
Disabled
Set this value to allow the L3 Data Cache ram to be corrected
while idle.
Enabled
IO Prefetching Set this value to enable IO Prefetching. Enabled
Set this value to disable IO Prefetching. Disabled
Super IO Chipset submenu
Figure 7 Super IO Configuration submenu
Table 6
Super IO Configuration submenu fields
Option
Description
Disabled Set this value to prevent the serial port from accessing any system resources. When this option
is set to Disabled, the serial port physically becomes unavailable
3F8/IRQ4 Set this value to allow the embedded serial port to use 3F8 as its I/O port address and IRQ 4
for the interrupt address. This is the default setting. The majority of serial port 1 or COM1
ports on computer systems use IRQ4 and I/O Port 3F8 as the standard setting. The most
common serial device connected to this port is a mouse. If the system will not use a serial
device, it is best to set this port to Disabled.
3E8/IRQ4 Set this value to allow the embedded serial port to use 3E8 as its I/O port address and IRQ 4
for the interrupt address. If the system will not use a serial device, it is best to set this port to
Disabled.