HP ProLiant DL165 G6 Server Software Configuration Guide

System BIOS configuration 10
Boot Settings Configuration submenu
Figure 4 Boot Settings Configuration submenu
Table 3 Boot Settings Configuration submenu fields
Field Description Options
Post Speed Up Set this value to allow display system configuration on boot. Enabled
Set this value to not allow display system configuration on boot. Disable
Num-Lock Set this value to allow the Number Lock on the keyboard to be enabled
automatically when the computer system is boot up. This allows the
immediate use of 10-keys numeric keypad located on the right side of the
keyboard. To confirm this, the Number Lock LED light on the keyboard
Will be lit.
Enabled
This option does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key located on
the upper left-hand corner of the 10-key pad. The Number Lock LED on
the keyboard will light up when the Number Lock is engaged. This is the
default setting.
Disabled
Restore after AC
Power Loss
Set this value to restores previous power state before loss occurred. Last State
Set this value always boot when AC power is restored. Power on
Set this value keep power off until the power button is pressed.
Stay Off
POST F1 Prompt Set this value to allow wait up to 15 seconds for press F1. Delayed
Set this value to allow wait indefinitely for press F1. Enabled
Set this value to not wait for F1 but continue booting. Disabled