HP ProLiant DL165 G6 Server Installation Sheet

ManualsBrandsHP ManualsServerHP ProLiant DL165 G6 Server

HP ProLiant DL165 G6 Server

Installation Sheet

First edition (June 2009)

Part number 576275-001

Important Safety Information

Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.

Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.

Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.

Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.

Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.

Legal notices

The information contained herein is subject to change without notice. The only warranties

for HP products and services are set forth in the express warranty statements accompanying

such products and services. Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

AMD is a trademark of Advanced Micro Devices, Inc.

Identifying Server Components

Front Panel Components

Figure 1 Front panel components

Item Description

1 Thumbscrews for rack mounting

2 Optical disk drive bay

3 Serial number pull tab

4 Two front USB 2.0 ports

5 Unitidentication(UID)LEDbutton

6 SystemhealthLED

7 NIC1LED

8 NIC2LED

9 Power button

10 HDDLED

11 Hard disk drive (HDD) bays 1, 2, 3, and 4

Rear Panel Components

Figure 2 Rear panel components

Item Description

1 Power supply cable socket

2 PS/2 mouse port (green)

3 GbELANportforNIC2

4 Captive thumbscrew for top cover

5 Serial port (teal)

6 Lowprole/Halflengthexpansionslot

7 Full height/Full length expansion slot

8 T10/T15 Wrench

9 Thumbscrew for PCI cage

10 UIDLEDbutton

11 VGA port

12 HP LO100i Management LAN Port

13 Two rear USB 2.0 ports

14 GbELANportforNIC1/Management

15 PS/2 keyboard port (purple)

Servercongurationresources

In addition to this Installation Sheet, other resources are available for more

informationregardingthecongurationandmaintenanceofyourserver:

•

For safety information and detailed procedures relating to installation of options,

refer to any installation instructions that came with the option, as well as the HP

ProLiant DL165 G6 series Server Maintenance and Service Guide.

•

For safety information and detailed procedures related to the rest of the steps

listedinthe“ConguringtheServer”section,refertorelevantchapteroftheHP

ProLiant DL100 Series Server User Guide.

• ForinformationrelatingtosystemBIOScongurationandoperatingsystem

installation, refer to relevant section of the HP ProLiant DL165 G6 Server

Software Conguration Guide.

•

Refer to the HP ProLiant DL165 G6 Server Support and Documentation CD for

additional information and updates not provided in this installation sheet. You can

also access additional information and documentation from the HP website at

http://www.hp.com/, either by connecting directly or through the Support CD.

ServerCongurationOverview

The steps listed below give an overview of the necessary setup procedures for

preparingtheHPProLiantDL165G6serverforoperation:

Connect the AC power cord and peripheral devices.

Power up the server.

Press F10 to enter BIOS setup.

Note the server BIOS version.

Verify the server BIOS version against the latest BIOS version listed for this

serverontheHPwebsite:

http://www.hp.com.

If you do not have the latest BIOS, update the BIOS now. Refer to the HP

ProLiant DL165 G6 Server Maintenance and Service Guide available on the HP

website:

http://www.hp.com/.

Install a supported operating system of your choice. For detailed procedures,

refer to the documentation provided by the operating system vendor. For a list

of operating systems supported by your ProLiant server, go to

http://www.hp.com/go/supportos.

Pre- and post-installation

procedures

When installing additional options in your HP ProLiant DL165 G6 server, observe

thefollowingprocedures:

Pre-installation procedures

1. Turn off the server and all the peripherals connected to it.

Disconnect the AC power cord from the power supply connector located on the

server rear panel to reduce the risk of electrical shock.

3. Ifserverisinstalledinarack,removeserverandplaceitonaatsurface.

Remove the top cover by following the procedure described later in the

“OpeningtheServer”section.

Post-installation procedures

1. Be sure all components are installed according to the described step-by-step

instructions.

Check to make sure you have not left loose tools or parts inside the server.

3. ReinstallthePCIcage,airbafe,peripherals,andsystemcablesthatyou

have removed.

Reinstall the top cover.

Reinstall server into rack.

Connect all external cables and the AC power cord to the system.

Press the power button on the front panel to turn on the server.

Opening the Server

The top cover and the top middle cover are detachable. You need to remove the

top cover before you can remove or replace a server component.

Toremovethetopcover:

Loosen the captive screw on the top cover with the T-15 wrench provided.

2. Slide the cover approximately 1.25 cm (0.5 in) toward the rear of the unit and

then lift the cover to detach it from the chassis.

Lift the top cover away from the chassis.

Figure 3 Removing the top cover

Toremovethetopmiddlecover:

Remove the four screws (one on each side of the chassis and two on the top

middle cover) that secure the top middle cover to the chassis with the T-15

wrench provided.

Lift the top middle cover away from the chassis.

Figure 4 Removing the top middle cover

Installing a Hard Drive

The drive bays on the front panel can accommodate up to four hard drives. The

server supports both SAS and SATA hard drives.

CAUTION:

Drives can be damaged by static electricity. Before handling

drives, touch an unpainted metal surface to discharge static electricity.

Toinstallaharddriveintheserver:

Remove the hard drive blank from front of system, if installed.

Push the hard drive assembly into the drive bay until it stops.

Press the HDD carrier latch inward until it clicks.

Summary of content (2 pages)

PAGE 1
HP ProLiant DL165 G6 Server Installation Sheet Identifying Server Components Server configuration resources Front Panel Components In addition to this Installation Sheet, other resources are available for more information regarding the configuration and maintenance of your server: • For safety information and detailed procedures relating to installation of options, refer to any installation instructions that came with the option, as well as the HP ProLiant DL165 G6 series Server Maintenance and Service
PAGE 2
Figure 5 Installing the hot-plug hard drive assembly Figure 8 Installing the non-hot-plug hard drive assembly Installing a Processor Additional Documentation The HP ProLiant DL165 G6 server supports Quad-core AMD Opteron 2000 series processors. For additional documentation, refer to the HP ProLiant DL165 G6 Server Support CD. You can also access additional information and documentation from the HP external website, either by connecting directly or through the Support CD. To install the processor: 1.