HP ProLiant DL165 G5p Server Software Configuration User Guide

System BIOS configuration 23
USB Configuration submenu
Figure 18 USB Configuration submenu
NOTE: when you install USB storage, there is display USB Mass Device Configuration item, from this
item, you can get some information about the device, some information you can configure it if you
need.
Table 15 USB Configuration submenu fields
Field Description Options
USB Controller This setting allows the use of the USB function. This is the default
setting.
Enabled
This setting makes the onboard USB function unavailable. Disabled
USB 2.0 Controller
Mode
This setting allows the use of USB ports transfer data in 480Mbps. This
is the default setting
Hi Speed
This setting allows the use of USB ports transfer data in 12Mbps. Full Speed
BIOS EHCI Hand-
Off
Set this value can support the EHCI-off, this is default value. Enabled
Set this value not allow support the EHCI-off. Disabled