HP ProLiant DL165 G5p Server Maintenance and Service Guide

Contents 76

Navigating through the Setup Utility

Use the keys listed in the legend bar on the right of the Setup screen to navigate through the various

menu and submenu screens of the Setup Utility. Table 11 lists these legend keys and their respective

functions.

Table 11

Setup Utility Navigation Keys

Key Function

← and → Move between selections on the menu bar.

↑ and ↓ Move the cursor to the field you want.

The currently selected field is highlighted. The right side of each menu screen displays the Item

Specific Help panel. This panel displays the help text for the selected field. It updates as you

move the cursor to each field.

<+>, <–> Select a value for the currently selected field if it is user-configurable.

Press the (+) or (-) keys repeatedly to scroll through each value one at a time, or press the Enter

key to choose from a pop-up menu that displays all possible values at once.

A parameter that is enclosed in square brackets [ ] is user-configurable.

Grayed-out parameters are not user-configurable for one of the following reasons:

• The field value is auto-configured or auto-detected.

• The field value is informational only.

• The field is password-protected.

Enter Select a field value or display a submenu screen.

►

Indicates a submenu field.

To view a submenu screen, use the ↑ and ↓ keys to move the cursor to the submenu you want,

then press Enter.

Esc When you press this key:

• On a primary menu screen, the Exit menu displays.

• On a submenu screen, the previous screen displays.

• On a pop-up menu, closes the pop-up without making a selection.

Displays the General Help window. See the Figure64.

The General Help window describes other Setup navigation keys that are not displayed on the

legend bar.

F10 Saves all changes to settings and closes the Setup Utility.