HP ProLiant DL165 G5p Server Maintenance and Service Guide

Contents 67
Figure 50 Removing the slot cover
To install the PCI card:
1. Slide the expansion board into the slot, aligning the board with its matching connector.
Firmly press the board to seat it properly on the slot.
2. Tighten the screw that secures the card to the PCI cage.
Figure 51 Installing the PCI card
To reinstall the PCI cage:
1. Installing the PCI riser card into the system.
a. Align the PCI card with the open expansion slot.
b. Press the PCI card straight down into the expansion slot on the system board.
2. Align the PCI cage to the system board expansion slot, and then press it down to ensure full
connection to the system board.
3. Tighten the two captive screws to secure the PCI cage to the chassis.