HP ProLiant DL165 G5p Server Maintenance and Service Guide

Contents 56
System Board Configuration
Processor
HP ProLiant DL165 G5p Server supports two AMD dual and quad core processors. If a single
processor is installed, then use socket 0. When two processors are used, the server supports boot
functions through the processor installed in processor socket 0. However, if processor 0 fails, the
system can’t boot up, and if processor 1 fails, the system will automatically boots from processor 0
and provides a processor failure message.
The processor socket supports 2P AMD Opteron 2000 series processor.
CAUTION: It is recommended to use processors of same speeds or cache sizes to prevent possible
server malfunction.
Figure 34 Processor location
Item Description
1 Processor 0
2 Processor 1
WARNING: To reduce the risk of personal injury from hot surfaces, allow the heat sink and the
processor to cool before touching them.
NOTE: Before installing the processor, remove the air baffle.
To remove the air baffle:
1. Gently rock the air-baffle up.
2. Take the air baffle out from the chassis.