HP ProLiant DL165 Generation 5 Software Configuration Guide

System BIOS configuration 16
S-ATA Configuration submenu
Figure 9 S-ATA Configuration submenu
Table 8 S-ATA Configuration submenu fields
Field
Description
Options
HT1000 S-ATA Set this value to enabled HT1000 S-ATA controller. Enabled
Set this value to prevent the generation of power state block for
use of PowerNow drive in a single core system.
Disabled
S-ATA mode Set this value to S-ATA mode. S-ATA
Set this value to P-ATA mode. P-ATA
INT13 Support Set this value to enabled INT13 support. Enabled
Set this value to disabled INT13 support. Disabled