HP ProLiant DL165 Generation 5 Software Configuration Guide

System BIOS configuration 14

Table 6 IDE Configuration submenu fields

Field Description Options

Onboard PCI IDE

Controller

Set this value to allow the computer system to detect the Primary

and Secondary IDE channels. This includes both the Primary

Master, Primary Slave, Secondary Master, and Secondary Slave.

Both

Set this value to allow the computer system to detect only the

Primary IDE channel. This includes both the Primary Master and the

Primary Slave.

Primary

Set this value to prevent the computer system from using the

onboard IDE controller.

Disabled

Set this value to allow the computer system to detect only the

Secondary IDE channel. This includes both the Secondary Master

and the Secondary Slave.

Secondary

Hard Disk Write Protect Set this value to allow the hard disk drive to be used normally.

Read, write, and erase functions can be performed to the hard disk

drive. This is the default setting.

Disabled

Set this value to prevent the hard disk drive from being erased. Enabled

IDE Detect Time

Out(Seconds)

This value is the best setting to use if the onboard IDE controllers

are set to a specific IDE disk drive in the BIOS