HP ProLiant DL165 Generation 5 Server Maintenance and Service Guide

Contents 75
Figure 67 Removing the non-hot-plug power supply
To replace the non-hot-plug power supply:
1. Align the non-hot-plug power supply to the right location next to the motherboard.
2. Align the screw holes on the non-hot-plug power supply with the screw holes on the chassis (one
on the top of the power supply, others on the sides).
3. Fasten the non-hot-plug power supply to the chassis using the screws that just been loosened.
Figure 68 Installing the non-hot-plug power supply