HP ProLiant DL160se Generation 6 Server Installation Sheet

ManualsBrandsHP ManualsServerHP ProLiant DL160se G6 Server

HP ProLiant DL160se G6

Server

Installation Sheet

Identifying server components

Front panel components

Figure 1 Front Panel Components / 2 3.5” Hot-plug HDD Model

Item Description

1 Thumbscrews for rack mounting

2 Drive online/error LED

3 Drive activity LED

4 Optical disc drive (optional)

5 Serial number pull tab

6 Front panel USB 2.0 port 0/1

7 Front UID LED/switch

8 System health LED

9 NIC 1 activity LED

10 Power LED/switch

11 Hard drive activity LED

12 NIC 2 activity LED

13 Hard disk drive (HDD) bays

Figure 2 Front Panel Components / 4 3.5” HDD Hot-plug Model

Item Description

1 Thumbscrews for rack mounting

2 Drive online/error LED

3 Drive activity LED

4 Optical disc drive (optional)

5 Serial number pull tab

6 Front panel USB 2.0 port 0/1

7 Front UID LED/switch

8 System health LED

9 NIC 1 activity LED

10 Power LED/switch

11 Hard drive activity LED

12 NIC 2 activity LED

13 Hard disk drive (HDD) bays

Figure 3 Front Panel Components / 4 3.5” HDD Non-hot-plug Model

Item Description

1 Thumbscrews for rack mounting

2 Optical disc drive (optional)

3 Serial number pull tab

4 Front panel USB 2.0 port 0/1

5 Front UID LED/switch

6 System health LED

7 NIC 1 activity LED

8 Power LED/switch

9 Hard drive activity LED

10 NIC 2 activity LED

11 Hard disk drive (HDD) bays

Rear panel components

Figure 4 Rear Panel Components / Hot-plug Power Supply Model

Item Description

1 Power supply cable socket

2 Serial port

3 VGA port

4 GbE LAN port for NIC 2

5 Mgmt port (optional)

6 Low-profile PCI expansion card slot cover

7 Full-height/full-length PCI expansion card slot cover

8 T-10/T-15 wrench

9 Screws for PCI cage

10 Rear UID LED/switch

11 GbE LAN port for NIC 1

12 Rear panel USB 2.0 port 2/3

Part number: 516738-001

March 2009 (First edition)

Summary of content (4 pages)

PAGE 1
HP ProLiant DL160se G6 Server Identifying server components Installation Sheet Figure 1 Front Panel Components / 2 3.5” Hot-plug HDD Model Part number: 516738-001 March 2009 (First edition) Figure 2 Front Panel Components / 4 3.
PAGE 2
Figure 5 Rear Panel Components / Non-hot-plug Power Supply Model System board components Figure 6 System Board Components Server configuration resources • Item Description 1 Power supply cable socket 2 Serial port 3 VGA port 4 GbE LAN port for NIC 2 5 Mgmt port (optional) 6 Low-profile PCI expansion card slot cover 7 Full-height/full-length PCI expansion card slot cover 8 T-10/T-15 wrench 9 Screws for PCI cage 10 Rear UID LED/switch 11 GbE LAN port for NIC 1 12 Rear panel USB 2.
PAGE 3
Figure 8 Installing the Hot-plug Hard Drive Figure 11 Fastening the Screw memory module into the slot until the holding clips snap back in place. CAUTION: Align pin 1 on the processor with pin 1 on the processor socket, or pin damage will occur. Figure 13 Installing the Memory Module CAUTION: HP recommends using Shin-Etsu X-23-7783D thermal grease compound for your ProLiant server. Apply the grease to the top of the processor in either a “5-Dot” or “S” shaped pattern. Ensure even distribution.
PAGE 4
CAUTION: For proper cooling, do not operate the server without the top cover, air baffle, expansion slot covers, or blanks installed. For additional information, see the user guide. If hot-plug components are supported, minimize the amount of time the top cover is removed. Additional documentation For additional documentation, refer to the HP ProLiant DL160se G6 Server Easy Set-up CD.