HP ProLiant DL160se G6 Server Software Configuration Guide

System BIOS configuration 13
Table 5 CPU Bridge Configuration submenu fields
Field Description Options
Transit the links to 4.800GT when transitioning the links to full-speed. 4.800GT
Transit the links to 5.866GT when transitioning the links to full-speed. 5.866GT
Transit the links to 6.400GT when transitioning the links to full-speed. 6.400GT
QPI L0s and L1 Enabled L0s and L1. Enabled
Disabled L0s and L1. Disabled
Memory Frequency Transit the memory frequency to the maximum speed. Auto
Transit the memory frequency to the 800MHz. Force DDR-800
Transit the memory frequency to the 1066MHz. Force DDR-1066
Transit the memory frequency to the 1333MHz. Force DDR-1333
Memory Mode Configure the memory to work in independent channel. Independent
Configure the memory to work in mirrors channel space between channels. Channel
Mirroring
Configure the memory with Lockstep between channel 0 and 1. Lockstep
Memory Inter
leaving
Memory controller should be configured as interleaved whenever possible. Enabled
Memory controller should be configured as interleaved whenever possible. Disabled
Demand Scrubbing Allow to scrub ECC demand. Enabled
Disable to scrub ECC demand. Disabled
Patrol Scrubbing Allow to scrub ECC patrol. Enabled
Disable to scrub ECC patrol. Disabled