HP ProLiant DL160 Generation 5 Server Software Configuration Guide

System BIOS configuration 33
BIOS Summary Display screen
The BIOS Summary Displays basic and important information about the current server configuration
and is necessary for troubleshooting and may be required when asking for technical support. This
information includes:
• Size of the system
• Serial port base I/O address
• Available hard drives and expansion boards
• PCI information
It is recommended that you check this screen during the initial system setup and each time you install,
remove, or upgrade accessories.
You first need to enable the display of the diagnostic screen during bootup. Follow the steps below.
To view the boot-time diagnostic screen:
1. In the Main menu screen, select Boot Options.
2. Select the BIOS Summary Screen field.
3. Press the plus (+) or minus (-) key to set the field to Enabled.
4. Press F10 to save the changes you made and close the Setup Utility.
5. Reboot the server.
The BIOS Summary Screen is displayed briefly at the end of POST.
Figure 27 BIOS Summary Screen
6. Press the Pause/Break key to continue displaying the screen until another key is pressed.
7. Press any key to continue with the system bootup.