HP ProLiant DL160 Generation 5 Server Software Configuration Guide

System BIOS configuration 10
Boot Settings Configuration submenu
Figure 4 Boot Settings Configuration submenu
Table 3
Boot Settings Configuration submenu fields
Field Description Options
Summary Screen Set this value to not allow display hardware summary screen before
booting the OS. The setting default value is Disabled.
Disabled
Set this value to allow display hardware summary screen before booting
the OS.
Enabled
Bootup Num-
Lock
Set this value to allow the Number Lock on the keyboard to be enabled
automatically when the computer system is boot up. This allows the
immediate use of 10-keys numeric keypad located on the right side of the
keyboard. To confirm this, the Number Lock LED light on the keyboard
Will be lit.
Enabled
This option does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key located on
the upper left-hand corner of the 10-key pad. The Number Lock LED on
the keyboard will light up when the Number Lock is engaged. The setting
default value is Disabled.
Disabled
Restore on AC
Power Loss
Set this value to restore previous power state before loss occurred. The
setting default value is Last State.
Last State
Set this value to always boot when AC power is restored. Power on
Set this value to keep power off until the power button is pressed. Stay Off
POST F1 Prompt Set this value to allow wait up to 15 seconds for press F1. The setting
default value is Delayed.
Delayed
Set this value to allow to wait indefinitely for press F1. Enabled