ProLiant DL145 Server Maintenance and Service Guide

3
Diagnostic Tools
Table 3-1: Diagnostic Tools
Tool Description How to run the tool
Insight Diagnostics Insight Diagnostics tests and verifies operation of
HP hardware. If Diagnostics finds a hardware
failure, it isolates the replaceable part, if possible.
Insight Diagnostics also gathers critical hardware
and software information on ProLiant servers.
Diagnostics can be downloaded by
following the support link on the
product website at
www.hp.com/support.
Systems Insight
Manager
When run on the ProLiant 300/500/700 series
units, HP Systems Insight Manager provides a
central management station to monitor the up and
down status of the ProLiant 100 server series and
provide system inventory and configuration
information.
You can download the HP Systems
Insight Manager software as well
as the HP Systems Insight
Manager Installation and User
Guide at
http://www.hp.com/go/hpsim
BIOS Setup Utility This utility configures the hardware installed in or
connected to the server. Specifically, it can:
Configure system devices and installed options
View system information
Select the boot device and boot priority Configure
ports and IRQs, if required
Run BIOS Setup by pressing the
F10 key during POST.
System Event Log (SEL) The SEL is a part of the BIOS Setup Utility
described above. The SEL is a log of system
events such as system failures or nonfatal error
conditions.
Run BIOS Setup by pressing the
F10 key during POST.
ROMPaq Utility The ROMPaq Utility checks the system and
provides a choice of available ROM revisions and
firmware.
Download the latest ROMPaq at
www.hp.com/support and follow
the instructions included with it.
Watchdog Timer The watchdog timer is a function of the
Management Processor.
You can enable this timer in the
BIOS Setup Management
Processor Configuration menu.
HP ProLiant DL145 Server Maintenance and Service Guide 3-1