ProLiant DL145 Server Maintenance and Service Guide

Removal and Replacement Procedures
IPMI Base Management Controller
To remove the IPMI Base Management Controller:
1. Power down the server. Refer to “Powering Down the Server” ea rlier in this chapter.
2. Extend the server from the rack. Refer to “Extending the Server from the Rack” earlier in
this chapter.
3. Remove the access panel. Refer to “R emoving the Access Panel” earlier in this chapter.
4. Remove the video board. Refer to “Vid eo Board” earl ier in this chapter.
5. Remove the IPMI Base Management Controller.
Figure 2-27: Removing the IPMI Base Management Controller
Reverse the steps to replace the IPMI Base Management Controller.
2-28 HP ProLiant DL145 Server Maintenance and Service Guide