ProLiant DL145 Server Maintenance and Service Guide

Removal and Replacement Procedures
Removing the PCI-X Expansion Board
To remove a PCI-X expansion board:
1. Power down the server. Refer to “Powering Down the Server” ea rlier in this chapter.
2. Extend the server from the rack. Refer to “Extending the Server from the Rack” earlier in
this chapter.
3. Remove the access panel. Refer to “R emoving the Access Panel” earlier in this chapter.
4. Remove the PCI-X riser cage. Refer to “R emoving the PCI-X Riser Cage” earlier in this
chapter.
5. Disconnect any cables connected to the expansion board.
6. Remove the board from the slot.
Figure 2-18: Removing the expansion board
Reverse the steps to replace the expansion board.
HP ProLiant DL145 Server Maintenance and Service Guide 2-19