SAS Controller Cabling for HP ProLiant DL145 Generation 3 Servers

4. Connect the LED cable to the LED connector.
IMPORTANT: To avoid damage to the SAS cables,
route the cables so that all bend radii are 12.7 mm
(0.5 in) or greater.
5. Route SAS cable 1 above the LED connector and below
the SAS connector closest to the power supply. Connect
SAS cable 1 to the SAS connector farthest from the
power supply.
6. Route SAS cable 2 above the LED connector and below
the SAS connector closest to the power supply. Connect
SAS cable 2 to the SAS connector closest to the power
supply.
To complete the installation, see the installation instructions
provided with the controller.