ProLiant DL145 Generation 3 Server Maintenance and Service Guide

Physical and operating specifications 70
Physical and operating specifications
This chapter provides physical and operating specifications for the HP ProLiant DL145 Generation 3 server. The
specifications for the following items are provided:
• System unit
• Memory
• Processor
System unit
Table 8 Hardware specifications
Item Description
Processor socket Dual AMD 1207-pin socket
Processor type AMD Opteron processor
Core logic chipset Broadcom ServerWorks HT-2100
Broadcom ServerWorks HT-1000
Super I/O chipset ServerEngines Pilot SMC
Hardware monitoring chipset ServerEngines Pilot SMC
Baseboard management controller ServerEngines Pilot SMC
Gigabit Ethernet controller Broadcom 5715 dual gigabit Ethernet controller
Onboard 10/100 Mbps LAN controller ServerEngines Pilot SMC
Memory controller Integrated in the AMD Opteron processor
Storage controller HT-1000 Broadcom BCM5785
Graphics controller ServerEngines Pilot SMC
I/O subsystem Four system board-level expansion slots:
• J6 and J9 — Support a full-sized 1 GHz, 16x16 HTX expansion board
installed on a HTX riser board
• J14 — Supports a full-sized PCI Express x16 expansion board installed on a
PCI Express x16 riser board
• J10 — Supports a low-profile 64-bit, 133 MHz PCI-X expansion board
installed on a PCI-X riser board
• J15 — Supports a low-profile PCI Express x4 expansion board installed on a
PCI Express x4 riser board
Memory Eight DDR-2 DIMM slots, 4 DIMMs per processor
Maximum system memory capacity: 16 GB (2 GB per DIMM)
Media storage • Two HDD bays for SATA or SAS drives
• Optical drive bay for 9.5-mm CD-ROM or CD/DVD combo drive
I/O ports • PS/2 keyboard port
• PS/2 mouse port
• Four USB 2.0 ports (two on the front panel, two on the rear panel)
• Video port
• Serial port
• Three LAN ports
Status LED indicators Front panel:
• UID
• System health
• Activity for NIC 1 and NIC 2
• HDD activity
• Power status
Rear panel:
• UID
• LAN activity/link status
• LAN network speed