HP ProLiant DL145 Generation 3 Server Software Configuration Guide

System BIOS configuration 16
Table 11 I/O Device Configuration submenu fields
Field Description Options
Base I/O Address Indicates the serial port base address. 3F8
2F8
3E8
2E8
Interrupt Indicates the serial port IRQ setting. IRQ 4
IRQ 3
Serial port Mode Selects the IPMI serial port operation mode. When set to System, the system
controls the serial port. When set to BMC, the baseboard management
controller (BMC) controls the serial port. When set to Shared, both the system
and the BMC have access to the serial port.
System
Shared
BMC
Console Redirection submenu
Figure 12 Console Redirection submenu
Table 12 Console Redirection submenu fields
Field Description Options
Com Port Address Selects whether to use a port on the system board for console redirection. Disabled
On-board COM A
Baud Rate Selects the baud rate for console redirection. 9600
19.2K
38.4K
57.6K
115.2K
Console Type Selects a terminal type used for console redirection. VT 100
VT100, 8 bit
ANSI, 7 bit
ANSI
VT 100+
VT-UTF8
ASCII
Flow Control Assigns control for the console redirection flow. None
XON/OFF
CTS/RTS