HP ProLiant DL140 Generation 3 Server Maintenance and Service Guide

Contents 95
System specifications
Technical specifications
System unit
Table 8 System unit specifications
Item Description
Processor socket Intel LGA771 processor socket (two)
Processor support Dual-Core and Quad-Core Intel Xeon processors
Core logic chipsets • Intel MCH – north bridge, core logic controller
• Intel ICH – south bridge
Super I/O chipset Integrated in the ServerEngines Pilot BMC
Hardware monitoring
chipset
Analog Devices ADM7462
Baseboard management
controller
ServerEngines Pilot
Gigabit Ethernet
controller
Broadcom BCM5721 NetXtreme Gigabit Ethernet Controller (two)
Onboard 10/100
Mbps LAN controller
Broadcom BCM5241 10/100BASE-TX Single-Channel Transceiver
Memory controller Integrated in the Intel MCH
Storage controller • Non-hot-plug SATA – Integrated in the Intel ICH
• Hot-plug SATA/SAS – Standard height/full-length PCI-X hot-plug SATA/SAS
controller board
VGA controller Integrated in the ServerEngines Pilot controller
I/O subsystem Four system board level PCI expansion slots:
• CN4 – Supports a low-profile 64-bit/133 MHz 3.3 V PCI-X riser board
• CN5 – Supports a low-profile PCI Express x8 riser board
• CN6 – Supports a standard height/full-length 64-bit/133 MHz 3.3 V PCI-X riser
board
• U32 – Supports a standard height/full-length PCI Express x16 riser board
Two PCI Express riser boards attached to the PCI riser board assembly supports
installation of two expansion boards at a time:
• Standard height/full-length PCI Express x16 riser board
• Low-profile PCI Express x8 riser board
Users have the option to replace this riser board with a PCI-X model using the
PCI-X riser board option kit.