HP ProLiant DL140 Generation 3 Server Maintenance and Service Guide

Contents 89
Hot-plug HDD peripherals
Hot-plug backplane board
If you are switching from a non-hot-plug SATA hard drive system to a hot-plug SATA/SAS one, you
will need to install the hot-plug backplane board (HPBB). This backplane board supports both SATA
and SAS functions. Go to page 40 for instructions on how to install this board.
Figure 67 Hot-plug backplane board connectors
Item Connector
code
Connector
1 CN3 3-pin I
2
C connector
2 CN5 5-pin ISP connector
3 CN6 9-pin HDD LED cable
connector
4 SAS2/SATA2 HDD 2 data cable connector
5 SAS1/SATA1 HDD 1 data cable connector
6 CN7 15-pin HDD power cable
connector
7 CN2 HPBB HDD 1 connector
8 CN1 HPBB HDD 2 connector
Com
p
onent side Solder side