User's Manual
Table Of Contents
- Installation Checklist – HP ProLiant Cluster F200 for MSA1000 using Microsoft Windows Server 2003, Enterprise Edition
- Table of Contents
- HP ProLiant Cluster F200 for MSA1000
- Hardware Cabling Scheme
- Introduction
- Software and Hardware Requirements
- Gathering Information
- Installing Node 1 Operating System
- Installing Node 2+ Operating System
- Configuring the Shared Storage
- Creating the Cluster
- Joining Node 2+ to the Cluster
- Validating the Cluster Configuration
- For more Information
- Feedback

Gathering Information
The following table provides a checklist for the required input parameters that will facilitate the
operating system and cluster installation. Write the information in the values column next to each item.
Place a checkmark (3) in the box after completing each step.
3
Item Values
Node 1: Node 2:
Node 3: Node 4:
Node 5: Node 6:
Name for each node:
(Microsoft Windows Server 2003,
Enterprise Edition supports up to eight
(8) nodes in a cluster).
Node 7: Node 8:
Node 1 Node 2
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 3 Node 4
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 5 Node 6
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 7 Node 8
Public network connection IP address
and subnet mask for each node:
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 1 Node 2
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 3 Node 4
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 5 Node 6
IP address:
Subnet mask:
IP address:
Subnet mask:
Node 7 Node 8
Private network connection (cluster
heartbeat) IP address and subnet mask
for each node:
IP address:
Subnet mask:
IP address:
Subnet mask:
5