HP ProLiant BL685c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 30
3.
Remove the access panel ("Access panel" on page 24).
4. Remove the cache module capacitor pack.
To replace the component, reverse the removal procedure.
Front panel/hard drive cage assembly
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 25).
5. Disconnect the SAS/SATA cable, the SGPIO cable, and the hard drive power cable from the hard drive
backplane.