HP ProLiant BL660c Gen8 Server Blade Maintenance and Service Guide

Removal and replacement procedures 31
2.
Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove the mezzanine assembly from the server blade.
To replace the component:
1. Install the access panel ("Access panel" on page 24).
2. Align the mezzanine assembly with the guide pins on the system board, and then install the mezzanine
assembly on the system board.
3. Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.