HP ProLiant BL660c Gen8 Server Blade Maintenance and Service Guide

Removal and replacement procedures 27
2.
Remove the enclosure connector covers.
To replace the component, reverse the removal procedure.
DIMM baffles
CAUTION: To avoid damage to the server blade and the enclosure, install all DIMM baffles in
the proper location after adding or replacing DIMMs. DIMM baffles that are missing or installed
incorrectly can compromise server blade and enclosure cooling.
The server blade contains three DIMM baffles.
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Disconnect any cables that may be routed across the DIMM baffle.
5. Remove one or more DIMM baffles: