HP ProLiant BL490c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 32
6.
Remove the heatsink blank.
To replace the component, reverse the removal procedure.
Heatsink
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Disconnect the hard drive cables.
5. Remove the DIMM baffle ("DIMM baffle" on page 25).