HP ProLiant BL490c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 29
To replace the component, reverse the removal procedure.
Battery tray
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove the battery tray.
To replace the component, reverse the removal procedure.
USB/SD card module
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Locate the SD card module ("System board components" on page 55).