HP ProLiant BL490c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 26
4.
Disconnect the hard drive cables.
5. Remove the DIMM baffle.
6. Remove the hard drive ("Hard drive" on page 24).
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Disconnect the hard drive cables from the system board.
5. Remove the DIMM baffle ("DIMM baffle" on page 25).