HP ProLiant BL465c Gen8 Server Blade Maintenance and Service Guide

Removal and replacement procedures 50
5.
Remove all hard drives ("Drive" on page 25).
CAUTION: Always disconnect the drive cables from the SAS controller before removing the
DIMM baffle. Failure to do so may result in damage to the SAS controller.
6. Disconnect the drive cables from the SAS controller and remove the DIMM baffle ("DIMM baffle" on
page 27).
7. Remove all DIMMs ("DIMMs" on page 28).
8. Disconnect the mezzanine option capacitor pack cable, if installed ("Capacitor pack cabling" on page
64).
9. Remove the mezzanine option capacitor pack, if installed ("Removing the mezzanine option capacitor
pack" on page 37).
10. Remove the front panel/drive cage assembly ("Front panel/drive cage assembly" on page 39).
11. Remove the mezzanine assembly ("Mezzanine assembly" on page 29).
12. Remove the FlexibleLOM ("FlexibleLOM" on page 32).
13. Remove the heatsink ("Heatsink" on page 42).
14. Open the processor socket retaining bracket and the processor locking lever.