HP ProLiant BL465c Gen8 Server Blade Maintenance and Service Guide

Removal and replacement procedures 37
6.
Remove the capacitor pack.
To replace the component, reverse the removal procedure.
Removing the mezzanine option capacitor pack
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Disconnect the drive cables from the SAS controller and remove the DIMM baffle ("DIMM baffle" on
page 27).
5. Disconnect the capacitor pack cable from the mezzanine option.