HP ProLiant BL465c Gen8 Server Blade Maintenance and Service Guide

Removal and replacement procedures 33
2.
Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove the mezzanine assembly ("Mezzanine assembly" on page 29).
5. Use the FlexibleLOM handle to remove the FlexibleLOM from the system board.
To replace the component:
1. Align and install the FlexibleLOM. Press down on the handle to seat the FlexibleLOM on the system
board.
2. Install the mezzanine assembly ("Mezzanine assembly" on page 29).
3. Install the access panel ("Access panel" on page 24).