HP ProLiant BL465c Gen8 Server Blade Maintenance and Service Guide

Removal and replacement procedures 28
To replace the component:
1. Install the DIMM baffle.
2. Connect the drive cable connectors to the SAS controller.
3. Install the access panel ("Access panel" on page 24).
DIMMs
CAUTION: Use only HP DIMMs. DIMMs from other sources may adversely affect data integrity.
To identify the DIMMs installed in the server blade, see "DIMM identification (on page 74)."
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).