HP ProLiant BL465c G7 Server Blade Maintenance and Service Guide

Component identification 58
Item Description
3
Smart Array connector
4
TPM security rivet (optional)
5
Micro SD connnector
6
Internal USB connector
7
Mezzanine connector 2 (Type I or Type II mezzanine)
8
Enclosure connector
9
Mezzanine connector 1 (Type I mezzanine only)
10
System maintenance switch (SW1)
11
Embedded NICs (2)
12
Battery
13
Processor socket 1 (populated)
14
Processor socket 2
The symbols correspond to the symbols located on the interconnect bays. For more information, see the
HP ProLiant BL465c G7 Server Blade Installation Instructions that ship with the server blade.
DIMM slot identification
Each processor supports eight DIMM slots. To identify the DIMM slots for each processor, see "System board
components (on page 57)."
Mezzanine connector definitions
Item PCIe
Mezzanine connector 1
x4, Type I mezzanine card only
Mezzanine connector 2
x8, Type I or II mezzanine card
A PCIe x4 mezzanine connector supports x8 cards at up to x4 speeds. A PCIe x8 mezzanine connector supports x16
cards at up to x8 speeds.