HP ProLiant BL465c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 44
7. Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
Allow the alcohol to evaporate before continuing.
8. Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
9. Install the heatsink.
IMPORTANT: Install all components with the same configuration that was used on the failed
system board.
10. Install all components removed from the failed system board.
11. Install the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on page
33).
12. Install the hard drives ("Hard drive" on page 27).