HP ProLiant BL465c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 32
1.
Install the mezzanine card. Press down on the connector to seat the board.
2. Install the access panel ("Access panel" on page 26).
Cache module capacitor pack
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 25).
3. Remove the access panel ("Access panel" on page 26).
4. Remove the cache module capacitor pack.
IMPORTANT: The spare capacitor pack ships with two small feet installed. Remove the feet
before installing the capacitor pack in this server blade.
To replace the component, reverse the removal procedure.