HP ProLiant BL465c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 29
3.
Remove the access panel ("Access panel" on page 26).
4. Disconnect the cables, and then remove the DIMM baffle.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 25).
3. Remove the access panel ("Access panel" on page 26).
4. Remove the DIMM baffle ("DIMM baffle" on page 28).
5. Remove the DIMM.
To replace the component, reverse the removal procedure.