HP ProLiant BL465c G7 Server Blade Maintenance and Service Guide

Removal and replacement procedures 28
b.
Release the hard drive tray, slide it forward until it locks, and then press hard drive carrier 1 down
to access hard drive 2.
c. Remove hard drive 2.
To replace the component, reverse the removal procedure.
DIMM baffle
CAUTION: To avoid damage to the server blade and the enclosure, install all DIMM baffles in
the proper location after adding or replacing DIMMs. DIMM baffles that are missing or installed
incorrectly can compromise server blade and enclosure cooling.
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 25).