HP ProLiant BL465c G6 Server Blade Maintenance and Service Guide

Removal and replacement procedures 28
1.
Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all DIMM baffles ("DIMM baffle" on page 27).
5. Remove the DIMM.
To replace the component, reverse the removal procedure.
Hard drive backplane
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 25).
5. Remove all hard drive blanks ("Hard drive blank" on page 25).
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive
backplane.