HP ProLiant BL465c Generation 5 Server Maintenance and Service Guide

Removal and replacement procedures 32
3.
Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 25).
5. Remove all hard drive blanks ("Hard drive blank" on page 25).
6. Remove the hard drive backplane ("Hard drive backplane" on page 28).
7. Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on
page 29).
8. Remove the USB key, if any ("Component identification" on page 54, "System board components"
on page 57).
9. Remove the HP Smart Array E200i Controller cache module (on page 31).
10. Remove the HP Smart Array E200i Controller battery pack.
To replace the component, reverse the removal procedure.
Server blade handle
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 25).
5. Remove all hard drive blanks ("Hard drive blank" on page 25).
6. Remove the hard drive backplane ("Hard drive backplane" on page 28).
7. Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on
page 29).