Manualshelf

HP ProLiant BL45p Generation 2 Server Blade Maintenance and Service Guide

ManualsBrandsHP ManualsServerHP ProLiant BL45p G2 Server
31323334353637383940
Removal and replacement procedures 32
5.
Remove the power button/LED board cable.
CAUTION: Always align the cable before closing the connector. Failure to align the cable
properly can result in damage to the cable or the connector.
To replace the component, reverse the removal procedure.
Processor air baffle
To remove the component:
1. Power down the server blade (on page 28).
2. Remove the server blade (on page 28).
3. Remove the access panel ("Access panel" on page 29).
4. Remove the processor air baffle.
To replace the component, reverse the removal procedure.