HP ProLiant BL420c Gen8 Server Blade MSG

Removal and replacement procedures 28
5.
Remove the SAS controller.
To replace the component:
1. Install the SAS controller.
2. Connect the capacitor pack cabling, if installed ("FBWC capacitor pack cabling" on page 65).
3. Install the access panel ("Access panel" on page 24).
DIMM baffles
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Disconnect the capacitor pack cabling, if connected ("FBWC capacitor pack cabling" on page 65).