HP ProLiant BL40p Server Blade Maintenance and Service Guide

About This Guide
CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of
clearance at the front and back of the server.
CAUTION: The computer is designed to be electrically grounded (earthed). To ensure proper
operation, plug the AC power cord into a properly grounded AC outlet only.
NOTE: Any indications of component replacement or printed wiring board modifications may void any
warranty.
Where to Go for Additional Help
In addition to this guide, the following information sources are available:
• HP ProLiant BL p-Class System Setup and Installation Guide
• HP ProLiant BL p-Class System Hardware Installation and Configuration poster
• HP Servers Troubleshooting Guide
• Altiris eXpress Deployment Server for ProLiant Servers User Guide
• Integrated Lights-Out User Guide
• ROM-Based Setup and Utility User Guide
• White paper: HP ProLiant BL p-Class System Overview and Planning
• White paper: Configuring a Preboot eXecution Environment (PXE) using Red Hat Linux
7.2 on HP ProLiant Servers
• QuickSpecs
• Service Quick Reference Guide
Integrated Management Log
The server includes an integrated, nonvolatile management log that contains fault and
management information. The contents of the Integrated Management Log (IML) can be
viewed with Insight Manager.
viii HP ProLiant BL40p Server Blade Maintenance and Service Guide