HP ProLiant BL40p Server Blade Maintenance and Service Guide

Diagnostic Tools
Table 3-1: Diagnostic Tools continued
Tool Description How to run the tool
Survey Utility The Survey Utility gathers critical hardware and
software information on server blades.
If a significant change occurs between
data-gathering intervals, the Survey Utility marks
the previous information and overwrites the survey
text files to reflect the latest changes in the
configuration.
The Survey Utility is available on
the ProLiant Essential Rapid
Deployment Pack CD or on the
HP website:
www.compaq.com/support/files/
servers/us/index.html
Integrated Lights-Out
ROM-Based Setup Utility
(iLO RBSU)
The iLO RBSU is the recommended method to
configure and set up the iLO. The iLO RBSU is
designed to assist you with setting up an iLO on a
network; it is not intended for continued
administration.
Run iLO RBSU by pressing the
F8 key during POST.
Integrated Management
Log (IML)
The IML is a log of system events such as system
failures or nonfatal error conditions. View events in
the IML from within:
• Insight Manager 7
• Survey Utility
• Operating system-specific IML utilities
The IML requires HP operating
system management drivers.
Refer to the ProLiant Essentials
Rapid Deployment Pack CD for
instructions on installing the
appropriate drivers.
Option ROM
Configuration for Arrays
(ORCA)
The Option ROM Configuration for Arrays utility is a
menu-driven utility that does not require a CD and
can be started when the server blade is booting.
This utility enables users to perform the following
functions:
• Create, configure, and/or delete logical drives.
• Specify RAID levels.
• Assign online spares.
• Set interrupts and the boot controller order.
Run ORCA by pressing the F8
key during POST.
ProLiant Essentials
Rapid Deployment Pack
The optional ProLiant Essentials Rapid Deployment
Pack is the preferred method for rapid, high-volume
server blade deployments. The Rapid Deployment
Pack includes Altiris eXpress Deployment Server
and the SmartStart Scripting Toolkit.
Install the CD in the CD-ROM
drive of the administrator
workstation or client PC and refer
to the documentation that ships
with the software.
Embedded Server Setup
(ESS)
The Diagnostics Utility, which checks the validity of
three server blade subsystems needed to boot an
OS, is enabled through the ESS System
Maintenance menu. It includes the Memory Test,
CPU Test, and Boot Disk Test. The Inspect Utility,
which allows you to view system configuration
information, is also enabled through ESS.
Run ESS by pressing the F10
key during POST.
Syslog file The syslog file implies a Linux OS and records
server blade activity.
View the syslog file through
/var/log messages
continued
HP ProLiant BL40p Server Blade Maintenance and Service Guide 3-3