HP ProIiant BL2x220c G6 Server Blade Maintenance and Serivce Guide

Component identification 60
System maintenance switch
Position Function Default
1
iLO 2 security override Off
2
Configuration lock Off
3
Reserved Off
4
Reserved Off
5
Password disabled Off
6
Reset configuration Off
7
Reserved Off
8
Reserved Off
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
CAUTION: Clearing CMOS and/or NVRAM deletes configuration information. Be sure to
properly configure the server or data loss could occur.
Access components
CAUTION: The jackscrews control the unseating and seating of critical system connectors.
Failure to use the jackscrews to remove and install the server B assembly can cause the system
boards to fail.
Item Description
1
Jackscrew 1
2
Jackscrew 2
3
T-15 Torx wrench