HP ProIiant BL2x220c G6 Server Blade Maintenance and Serivce Guide

Removal and replacement procedures 27
o
To remove the hard drive assembly from the server B assembly, remove the T-10 hard drive carrier
screw and then remove the hard drive assembly.
5. Remove the hard drive from the carrier.
CAUTION:
To avoid damage to the hard drive, use the retaining screw to lower the hard drive
assembly into position.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Access the internal server components (on page 24).