HP ProIiant BL2x220c G6 Server Blade Maintenance and Serivce Guide

Removal and replacement procedures 26
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Access the internal server components (on page 24).
4. Remove the hard drive assembly:
o To remove the hard drive assembly from the server A assembly, remove the T-10 hard drive carrier
screw and loosen the two system board thumbscrews. Then, slide the system board toward the rear
of the enclosure and remove the hard drive assembly.