HP ProLiant BL25p Generation 2 Server Blade Maintenance and Service Guide

Removal and replacement procedures 44
4.
Remove the power converter module.
To replace the component, reverse the removal procedure.
Power converter module retainer
To remove the component:
1. Power down the server blade (on page 24).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
4. Remove the power converter module retainer. Retain the T-15 Torx screwdriver for future use.
To replace the component, reverse the removal procedure.